![]() ![]() ![]() You want a 5/8th's spark plug socket designed to go in and grab hold of the socket. Then the spark plug is right down in there. Shake it up and down a little bit and then the coil comes up and out. Then once you have the bolt removed, just you can move it around. Push the tab down and pull the clip right off. You need a screwdriver to just push the little tab right in the center. Each of them had a little grey clip that you just pull on. Any one of them, just remove the 10 mm bolt. This vehicle will be sitting for awhile so I'm just using a vacuum cleaner to clean up the vacated mounts house that's sitting on the intake. This also- There's a small backing line here. You can either use a flat-plate screwdriver or an 8 mm socket with a ratchet and extension to undo those clamps. Remove that tube and then loosen both this one and this one to pull this apart. Now to remove this you want to remove this intake tube which is a clamp here and a clamp here. Okay, working from the passenger side, you'll want to remove two bolts and hold the top of the air box. You'll also need a 5/8ths spark plug socket. You'll need 8 and 10 mm sockets for the racket extension. This has the 3.5 Liter 5-cylinder, which is the same as the 4-cylinder, a pretty easy procedure. In this video, we're going to show you how to change spark plugs on this Chevy Colorado. Next time you need parts for your vehicle, think of. Brought to you by your source for quality replacement parts and the best service on the internet. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |